blade

Not much spinney stuff going on at the minute but have been making a couple of tools. 1. Brass and steel marking gauge. 2. Ally and brass router using an old Allen key for a blade. 3. Steel scraper plane loose copy of a Stanley No.12, blade cut from an old circular saw blade. I'm pleased that...

Hi Does anybody know if it is possible to get a spiral blade for a scroll saw with pin ends. Cheers Tony

Well the day is nearly upon us so I spent a little time this morning replacing my bandsaw blade ready to cut the pieces I have cut into rounds. The old blade was cutting teribble and I should have changed a while ago. So the first thing in the new year is to buy some replacement blades as I like...

Im having real issues with keeping my bandsaw supplied with blades - Im generally having to buy a new blade every month or so and Im not sure what is going wrong. The last blade I got from Tuffsaw started to wander when ripping some iroko and the more cuts I did the worse it got until I...

I have a Scheppach bandsaw Basato 1, i have only ever used 1/4 wide blades and they are a royal pain to get to run on the wheels. I have now bought a 3/8 wide blade and i cannot get the blade to stay on the wheels no matter what i do. When i set the saw blade up i set all the guides wide open, i...

I have a Charnwood W715 Band Saw. I need to get a new blade they come with a width of 1/4" - 3/8" - 1/2" which size blade do you recommend for cutting mainly pen blanks. Glen

Hi everyone I need a bit of help with this one. My 84 year old student has a Sheppach Basato Bandsaw and the blade guides are in need of replacement. In All there are 6 guides (3 top and 3 bottom) which support the blade from either side and the rear of the blade both above and below the cutting...

Tried some grooves filled with coloured epoxy!:rolling: was really to try out the cutting tool made from a saw blade that I was reminded to do from a post the other day! :ciggrin:

I tried to cut a pen blank using my scroll saw using a brand new Olsen skip tooth blade. the blade hardly penetrated the blank. What type of blade should I use?

After busting my bandsaw blade which incidentally used to cut my acrylic blanks a treat I went ahead and order what I thought was the same type blade (6 tpi x 1/4 in) off the internet. Turns out I ordered something that lumberjacks use for cutting down giant redwoods ! It looks more like a rip...

New bandsaw blade arrived today. now am I behaving like a complete pratt in not seeing the solution or is there something fundamentally wrong here ? In my defence let it be known that I am not an engineer but a lowly retired office worker who likes to try and make pens ! New blade on the right...

I have a Scheppach hbs 20 bench band saw all worked well, had to put in a new blade no problem, followed the instructions fitted fine worked ok :thumbs:. I have only cut a few bits with the new blade, now when I cut anything thick or thin the cut goes to the right. So I take off the blade and...