• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

danish

  1. P

    Golf part 1.

    Great pattern from Steve good. I planed the Oak down to 12mm. I used Olsen 2/0 and No5 blades. The Danish oil from rustins gives a fantastic warm colour to the Oak. Part 2 coming soon. Golf Scroll saw. - YouTube
  2. Dalboy

    Chestnut Sun Burst

    Chestnut burr sanded to 400 grit and then coloured with red and yellow water based dyes and finished with Danish oil before giving it a buff. Measures 5 1/2" X 2 1/2"
  3. D

    Had a go at coasters no lathe involved!!!

    Think these have turned out quite well, 4 coats of danish oil as a finish. Cheap as chips but look different! Well I think so?
  4. Freck Fraser

    Square Bowl

    An 11" square bowl, Idigbo/Iroko, 3 1/4" deep. Sanded to 320 and finished with danish oil, 3 coats.
  5. Neil Lawton

    Olive bowl.

    Just another Olive bowl. 9 1/4" x 3 1/2" finished in Danish Oil.
  6. apw43

    Oak Bowl

    Afternoon All An oak bowl I have recently finished, size is 300mm diameter x 50mm thick, the finish is Danish oil. c&c welcome All the best Andy
  7. Neil Lawton

    Squarish

    A little dish in Olive Ash. 6 1/4" on the round x 1 1/2" high, finished in Danish oil.
  8. Neil Lawton

    A little Wych!

    Only small 5" x 1 1/2", finished in Danish oil.
  9. Vic Perrin

    Spalted Sycamore Bowl

    Spalted Sycamore approx 10" diam and 3" deep. Finished in Danish Oil and Microcrystalline Wax.
  10. M

    Axminster Slimline

    so grateful for all your kind comments from my post over the weekend. buoyed by the new found confidence i have this time used a standard axminster slim line Pen kit with Padouk, 2 coats cellulose sanding sealer, danish oil and CA glue x 4, finished to 15000 grit and t-cut. would appreciate any...
Top