• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

elite

  1. J

    Classic Elite 2

    A Gunmetal & Gold plated Classic Elite 2 Fountain pen. Made using Australian Red Mallee
  2. J

    Classic Elite Pen Failures

    I've turned two of these Classic Elite Fountain pens and on both of them the thread inside the "centre band" has either come out completely or stripped the thread. Does anyone have any idea what I might be doing wrong? Or is it likely to be the quality of the kit? Thanks in advance
  3. M

    Spalted Beech Classic Elite Fountain Pen

    My First attempt at this sort of pen. Gradually expanding my horizons. I used a lovely blank of spalted beech and The Cassic Elite Fountain Pen Kit. I had to turn off 1/8" from the top blank. I fond I didn't have a parting tool small enough to do this job. A quick hunt around my carving tools...
  4. A

    Pen mandrels and bushes

    Ok first post as a newbie so hope I don't go over old ground. If pen mandrels have an O/D to suit a standard 7mm tube, why are the bushes I've been purchasing (cigar / elite etc) have a much larger bore size? This only leads to the bushes running a mile off to the mandrel.
    • andyl
    • Thread
    • bushes elite mandrels pen purchasing
    • Replies: 10
    • Forum: Turning Pens
  5. G

    Wanted

    I am looking for 2 ELITE CAP NUTS can any one help. Glen:sob:
  6. angelo49

    Rollerball Hemlock

    Elite Rollerball Hemlock
  7. Winemaker

    Classic Elite Fountain Pen

    Just made (well tried) to make a Classic Elite Fountain Pen for the first time, the Instructions show 7 mm bushings and there are 7 mm bushings in the kit, fine of I go without checking the tube size, drill the blanks with a 10 mm drill glued the tubes in to the blanks put it all on the...
    • Winemaker
    • Thread
    • bushings elite pen started tube
    • Replies: 6
    • Forum: Off Topic
Top