• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

goblet

  1. Geoff Kent

    Sapele goblet

    Hi all.A Sapele goblet with barleytwist stem.Height 7" width of bowl 3".Finished with finishing oil and food safe oil.Cheers!
  2. Dalboy

    Boxes and some fun

    Spent the day making a bowl a couple of boxes and a little goblet with a captive ring. (Bowl in the Bowl section). Box from unknown spalted wood and goblet from LV had some fun with that one.
  3. Dalboy

    Yew Goblet

    While the Oil finish was drying on the coloured Chestnut burr I made this goblet as I wanted to do a spiral on a stem. Measures 7" X 3". I did have a catch which wrecked the foot but managed to find a piece of yew and roughly match that to the rest as I had put too much in to the spiral Ok 15...
  4. apw43

    A Coloured Goblet Take 2

    Afternoon All Used up the other piece of wood that the first goblet was made from, similar size to the last one but with a different shaped base and coloured blue c&c welcome All the best Andy
  5. apw43

    A Coloured Goblet

    Afternoon All A small goblet, 160mm high x 75mm at its widest, did some colouring on it because the wood was very bland. c&c welcome All the best Andy
  6. hawkeyefxr

    A goblet in Oak

    Well put my bashed bowl behind me and had a quick turn this morning, a Goblet. Making a long stem is a bit nerve racking with all the chatter. The stem is still thicker that i wanted but i'll work up to that. It's just oak finished with three coats of sanding sealer, which was then cut back with...
Top