round

Hi All I recently got hold of some of the blue/green (Poseidon) Mazzucchelli Ceboplast and made quite a few pens from it. This material is becoming increasingly scarce so its nice to have some again. It has a couple of properties that are a little different compared to other plastics. First of...

We’ve started adding a new range of round Alumilite pen blanks to our website, available in 135mm & 215mm lengths, ideal for kit and kitless / custom pen turners www.penblanksandmoulds.co.uk/round-alumilite-pen-blanks

A joy to find,smell,ribbons at turning ,sheer character ,glad it turned up in my blank room.All round the pen a pleasant journey.:goesred::goesred::goesred: Peter.

Marchesa Twist red, black, white resin. The blank is sold as 3/4'' round x 19'' long. I bought 2. Get quite a few pens at 38''.

Finally got round to doing this one today

Made on the metal lathe from a solid 3/4'' Round Brass Bar

This one took a lot of patience and a very, very light touch. I wanted to start sanding before it was even round. Chisel got sharpened ever 2 minutes as this was tough bit of wood.

Again only just got round to taking photos of these !!

Finished these the other weekend but only just got round to taking the photos, quite happy with the outcome.

Gents and Ladies, I'm after a bit of advice. I have bought a crown 19mm round nose scraper, and I have checked the grind angle on it and it comes in at 75 degrees. As I have a Sorby ProEdge, and it doesn't have a 75 degree setting, can anyone recommend a good angle to regrind the Scrape to? The...

A slimline from a hybrid blank donated by our Jim. I don’t know what happened to the pic the first time round, The pic is definitely there on the preview so I hope you can see it. Edit by Moderator: Image below.

Hi All, I was sent this idea for making round name ornaments. Started this afternoon and got this result very quickly. Will try and complete it in the morning.

I am having a problem with the nib section of pens you can see a overhang at the top of the image. I have tried different mandrels and other bushes the bushes are fom axminster measured them today and they are not 100% round so any advice of how to cure problem or is it a case of just getting...

I turned the Aqua one round today to show a little more wood ..

Hi all A short video on a couple of ideas for decorating bowl rims if 'round and brown' is getting a bit dull! Decorative Bowl Rim Ideas1 - YouTube

Made this to enter the pen box competition on IAP but I missed the deadline. Made of Poplar (it's a prototype) based on a scaled up .50 caliber round. Step drilled 5/8 and 1 1/8. It's made for the bolt action. No finish just Beall buffed.

I would like to say at the outset i am not here to wind people up. I know most of you are diehard wood turners. I use a small round carbide tip on a home made handle (oak) and 5/16 round SS rod. The carbide tip has zero rake and i use it to basically knock off the edges of the blank. As it...

From a batch made a few weeks ago, i just got round to cutting them ..

Hi Does anybody know if the Sorby pen jaws work well With round blanks? Thanks Peter