spray

Fresh of the lathe today a 10” Yew bowl finished with sanding sealer and several coats of spray lacquer.

Hi All, Following on from my bullet case post... My preference for finish is just microcrystalline wax... I like these to be tactile and used and love to see patina build up on these. I have used acrylic laquer spray and Krylon (bake on spray for guns) but only if decorative finish requested...

Fresh of the lathe this morning finished with spray lacquer some little girl will love it

Had a few min spare before dinner so popped out and turned this little beauty finished with sanding sealer and spray lacquer

Just don’t get the same results with melamine spray!

I was not sure about the pattern to start with but when applying the last coat of finish a friend came in and asked how much when I told them they brought it before the varnish had dried need I have worried. This measures 8" X 2" made from field maple sprayed with ebonising spray and the leaves...

Hi, When casting in a silicon mould, plastic pot or a specific mould shape do I always need to use Resin Release Spray ? If so does anyone have any recommendations. Does the spray react with the resin and effect the finish ?

I really need a name for this one. This piece is based on work of Mark Sanger. And not from the recent article in the magazine as I had already started before it came out. Not really got a name yet but sure it will come. Turned from a piece of quite plain Walnut. Texture applied with a power...

Small hollow form 4" X 3 1/4" top is spalted beech for contrast and the main body from a dirty looking piece of London plain sprayed with ebonising spray and decorated using chestnut iridescent paints and finished with satin acrylic spray

Made from Tulip wood and stands 6 1/2" X 3" decorated with ebonising spray and Jo Sonja Iridescent paints applied with a sponge

Small hollow form 3" X 4 3/4" with an 1/2" hole sanded inside and out to 400grit then textured on the outside finished with ebonising spray and dry brushed with pink iridescent paint Ok I know it does not look pink

Ebonising spray where do you buy your spray that has the cheapest postage

Finished "The Tower" last night but had to wait until this morning to take the photos. It stands 12" tall and at it's widest is 3 1/4" The main tower is Ash and the bowl section is Field Maple with the eye in Holly. The top was textured on the outside using a hanging type multi-tool with a...

Hi All, Finally finished the Magi. 3 coats of Acrylic Satin Spray. Don W

Just the final test for the Hydro Idea again, before I do a bit with a decent bit of melal, there was a quite bit of perosity in the Ally and it;s a bit under turned but worth trying I think, just need top get some nice coloured spray paints , Looking forward it as usual, roll on summer...

Just finished this vase, had a bit of seepage between colours when brushing on the sanding sealer, but I'm reasonably happy with it. I will use a spray on sealer when using stains in the future.

Wanted to have a go at making something small so I turned this little pot from tulip wood then ebonised it with Chestnut spray. My wife thinks it is cute. George

Morning all, How do you finish the outside of a burr? I have a nice knobbly bit of oak burr, and was thinking of using finishing oil on the inside and top, but I am not sure what to put on the knobbly outside, and on the natural edge bit of the bowl. Any suggestions? I haven't really had much...

An Antique Brass Celtic Design pen with Cross Clip , Made using a 200 year old Walnut Timber with contrasting sap included Styrene Celtic Knot effect. Spray Lacquer finish and burnished with Gun Stock Burnish.

I should have waited and posted this after finishing, but I was excited.:whistling: 4 coats of rattle can lacquer and a couple applications of Renaissance wax.