New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

I apply with the lathe stationary using a soft tissue to apply first a sealer then the top coat (Allowing to dry between coats). I apply it along with the grain. When I apply each coat I turn on and buff with the lathe running and sand between each coat with a very fine paper just enough to give a key for further coats

[QUOTE="Dalboy, post: 372811, member: 449"] I apply with the lathe stationary using a soft tissue to apply first a sealer then the top coat (Allowing to dry between coats). I apply it along with the grain. When I apply each coat I turn on and buff with the lathe running and sand between each coat with a very fine paper just enough to give a key for further coats [/QUOTE]

Verification