New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

They are made up from a standard 7mm kit drill through the firing pin insert and glue the tube in the top half is just the other tube the finial part of a shell with a bit filed out for the clip then a wooden plug to fit inside and into the tube going through the clip look at Pauls tuition all the info you will need mine are just a bit different to his http://www.penturners.co.uk/wood-turned-items/2999-7-62-how-i-did.html

[QUOTE="Woody, post: 79996, member: 192"] They are made up from a standard 7mm kit drill through the firing pin insert and glue the tube in the top half is just the other tube the finial part of a shell with a bit filed out for the clip then a wooden plug to fit inside and into the tube going through the clip look at Pauls tuition all the info you will need mine are just a bit different to his [url]http://www.penturners.co.uk/wood-turned-items/2999-7-62-how-i-did.html[/url] [/QUOTE]

Verification