New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Be my guest Woody. With the tube bang on 90 degs to the sanding surface it means the wood is spot on too. You can also put any transfer punch you want to suit the brass tube of your choice. If you want a bolt for your chuck they are 1/2 in UNF and they are getting more difficult to get a hold of but I have a couple of spares if you need one !!!

[QUOTE="Terry, post: 37167, member: 61"] Be my guest Woody. With the tube bang on 90 degs to the sanding surface it means the wood is spot on too. You can also put any transfer punch you want to suit the brass tube of your choice. If you want a bolt for your chuck they are 1/2 in UNF and they are getting more difficult to get a hold of but I have a couple of spares if you need one !!! [/QUOTE]

Verification