New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Many thanks for this one, I am beginning to identify fundamental issues here. First is aluminium extrusion and tensioned screws on a Proxxon DB 250, even with light passes, then the live centres are poor, so I will see about fixing the first, but not too many options on the second, so I will use 3mm holes and try again. Thank You.

[QUOTE="Delphi, post: 368919, member: 3937"] Many thanks for this one, I am beginning to identify fundamental issues here. First is aluminium extrusion and tensioned screws on a Proxxon DB 250, even with light passes, then the live centres are poor, so I will see about fixing the first, but not too many options on the second, so I will use 3mm holes and try again. Thank You. [/QUOTE]

Verification