New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Hi all

A Quick Newbie question.

When drilling acrylic blanks that need a largish hole, say around 12 to 13mm what the best way to drill, start small and step up to the final size in say 5 or 6 steps, or just go with the final size in one go.

Thanks for any advice with this.

Paul.

[QUOTE="Paul-H, post: 361024, member: 2640"] Hi all A Quick Newbie question. When drilling acrylic blanks that need a largish hole, say around 12 to 13mm what the best way to drill, start small and step up to the final size in say 5 or 6 steps, or just go with the final size in one go. Thanks for any advice with this. Paul. [/QUOTE]

Verification