New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Phill if you have the Sorby Scraper platform which fits their post and the sanding disc mdf is screwed to a faceplate which in turn is either screwed onto the headstock spindle or as Woody says fastened to a faceplate which hooks onto a scroll chuck jaws you will find it is automatically at 90 deg to the disc!!!! Hope this makes sense. Look at my photos again and you should see what I mean.

[QUOTE="Terry, post: 12497, member: 61"] Phill if you have the Sorby Scraper platform which fits their post and the sanding disc mdf is screwed to a faceplate which in turn is either screwed onto the headstock spindle or as Woody says fastened to a faceplate which hooks onto a scroll chuck jaws you will find it is automatically at 90 deg to the disc!!!! Hope this makes sense. Look at my photos again and you should see what I mean. [/QUOTE]

Verification