New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

If you have clogged your belt so badly that the rubber stick won't clean it remove the belt and soak it a couple hours in water and dish washing soap. I use Dawn. Then a wire brush should remove most of the residue. Be sure to let the belt to fully dry before recounting. The trick to using the sanding stick is use early and often.

[QUOTE="Terry Q, post: 201036, member: 657"] If you have clogged your belt so badly that the rubber stick won't clean it remove the belt and soak it a couple hours in water and dish washing soap. I use Dawn. Then a wire brush should remove most of the residue. Be sure to let the belt to fully dry before recounting. The trick to using the sanding stick is use early and often. [/QUOTE]

Verification