• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

For finishing with CA without bushings, I apply paste wax to the dead center and live center, apply with blue shop towel at 2000 RPM, buff with extra fine steel wool between coats and polish with Hut Ultra Gloss. I never use sand paper or Micro mesh.


Les


Top