New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

This is the jig that i use on the bandsaw for making my Celtic Cross pens. The mitre fence is a permanent fixture on the sled and set at 45° and can return to 90°. The toggle clam is used to hold a block of wood that is used for the stop, so that the blank returns to the same spot to do the cross cuts.

[ATTACH]255[/ATTACH]

[QUOTE="Jim, post: 2991, member: 1"] This is the jig that i use on the bandsaw for making my Celtic Cross pens. The mitre fence is a permanent fixture on the sled and set at 45° and can return to 90°. The toggle clam is used to hold a block of wood that is used for the stop, so that the blank returns to the same spot to do the cross cuts. [CENTER][ATTACH]255._xfImport[/ATTACH][/CENTER] [/QUOTE]

Verification