• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Click Bullet Pen Assembly

broadsea

Full Member
Joined
Sep 17, 2014
Posts
195
Location
Fraserburgh
First Name
John
I am trying to put together some click bullet pens but just cannot follow the short instructions that are on some sites. Has anyone else had a problem with these. It is driving me batty. Line up the pen parts according to DIAGRAM C.
•Insert the clip assembly into the barrel, press in.
•Insert the 3-piece mechanism, threaded end in first, into the opposite end of the barrel.
•Press the cartridge assembly into the opposite end of the barrel.
•Unscrew the tip off of the front end of the cartridge assembly.
• Insert the refill spring over the refill end.
•Insert the refill, black end in first into the opening at the tip, screw the tip back on.
•Drop the plunger spring into the opening at the clip end, follow with the plunger, screw
in.
• The pen is ready to operate by clicking on the plunger to extract or retract the refill tip

This to me is not very clear. It states insert the three piece mechanism but does not show how this mechanism goes together.......I must be thick
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,304
Location
Somewhere in Staffordshire,
First Name
Eamonn.
I am trying to put together some click bullet pens but just cannot follow the short instructions that are on some sites. Has anyone else had a problem with these.

TBH I haven't but then I usually go to the same supplier for the kits and they build up the same way.

Where did you get the kits from? What kit it is? (picture would also help)
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top