New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

I agree with Ed, moisture is the most likely cause, the other possibility, depending upon what you mean by cloudy is that your final polishing has gone right through the CA and back to the wood.

I never wet sand anyway, too much mess for my liking, but absolutely never would I do it on a wooden blank. Guess where your moisture is coming from.

[QUOTE="Walter, post: 218230, member: 95"] I agree with Ed, moisture is the most likely cause, the other possibility, depending upon what you mean by cloudy is that your final polishing has gone right through the CA and back to the wood. I never wet sand anyway, too much mess for my liking, but absolutely never would I do it on a wooden blank. Guess where your moisture is coming from. [/QUOTE]

Verification