-
Thanks for visiting The Penturners Forum today.
There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
Ray7756
Full Member
Very nice, im wondering how you Turned it 
Stunning piece of work
Cheers
Ray
Stunning piece of work
Cheers
Ray
KevinMc
Graduate Member
A great piece of work there...
Given your in North Wales I guess Welsh is you first language so I am sure you will read those words with pride at each coffee break.
What was the wood reclaimed from?
Kevin
I Live in Carmarthenshire South Wales and the plan was to sell the table , however SWMBO liked it.
Changed our old hand made table and I now have a 5 foot x 2 foot x 4inch thick pippy Oak waney edge slab to either sell or cut up for blanks.
Wood was reclaimed from a local builder who had loads of off cuts of Solid Oak kitchen worktops.
Changed our old hand made table and I now have a 5 foot x 2 foot x 4inch thick pippy Oak waney edge slab to either sell or cut up for blanks.
Wood was reclaimed from a local builder who had loads of off cuts of Solid Oak kitchen worktops.
Engraved using my CNC Routing machine.
Penpal
Grand Master
Morning here Johnny magnificent Coffee Table mate I can understand the wife claiming it. I watched a Video of the anthem played on a car stereo driving through streets in Wales through the windscreen sung in english. Beautiful words mate.Enclosed the lower part of the burl I cut for Skiprats exchange, he lives as near the top of Wales as you in the South. It would seem a shame to put a cloth on your masterpiece.
Peter.
Peter.
Attachments
Oh I like that Johnny, superb looking piece of furniture.
Must be a nice size bed.
I just brought a second hand gantry unit to "play" with, it was on Mach3 but it wants some TLC and I also want to convert it over to smoothie or GRBL tho.
Must be a nice size bed.
I just brought a second hand gantry unit to "play" with, it was on Mach3 but it wants some TLC and I also want to convert it over to smoothie or GRBL tho.
Oh I like that Johnny, superb looking piece of furniture.
Must be a nice size bed.
I just brought a second hand gantry unit to "play" with, it was on Mach3 but it wants some TLC and I also want to convert it over to smoothie or GRBL tho.
At the top end of its capacity , it is the german made Heiz High Z -s 1000 -t model. I use the Vectric V Carve pro programme
Still learning its capacities and capabilities .
Nice Machine, but they take up more room than you think don't they
Do you have rotary for it?
I have a large workshop and do not have rotary 4 D attachment , but if you have a spare one you don't need , i will take it off your handsNice Machine, but they take up more room than you think don't they
Do you have rotary for it?
I have a large workshop and do not have rotary 4 D attachment , but if you have a spare one you don't need , i will take it off your hands
Nope, have one but not spare, not yet anyway..
Not got mine even at home yet, its stored elsewhere as I really don't know how I'm going to fit it in.
I need a bigger workshop, or less tools. I don't think the latter is going to happen tho
wm460
Grand Master
- Joined
- Mar 16, 2013
- Posts
- 23,113
- First Name
- Mark
Very nicely done Johnny.
I always admire how your rugby players sing your National Anthem so enthusiastically, while our mumb there way through, if they dont just stand there like stunned mullets.
I always admire how your rugby players sing your National Anthem so enthusiastically, while our mumb there way through, if they dont just stand there like stunned mullets.
Nope, have one but not spare, not yet anyway..
Not got mine even at home yet, its stored elsewhere as I really don't know how I'm going to fit it in.
I need a bigger workshop, or less tools. I don't think the latter is going to happen tho
I just sold a few tools to create space, a hegner scroll saw , a Dore Westbury Milling machine and a fox table router and a small record DML 305 lathe.
I am a horder and amazing what i have accumulated over the years.
Dai iawn Johnny
hawkeyefxr
Full Member
A great piece of work there...
Given your in North Wales I guess Welsh is you first language so I am sure you will read those words with pride at each coffee break.
What was the wood reclaimed from?
Kevin
wow that is something very special.
Can i ask how and what you used to do the engraving?
Very nice Johnny. A great job.
Pastor of Muppets
Full Member
Beautiful table there Johhny. I remember hearing this sung at Arms Park way back in the way back when and thinking the stadium would collapse! Men of Harlech is still my favourite though, when i was at Drindodd there were three male voice choirs playing one night one Welsh one South African and one Moari it was ana amazing night!
A large CNC Router
