New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

A pair of elm pens. The Sedona is from a piece of elm burr I picked up whilst on a walk with the dog last year after it had been cut off and chucked into the side and the slimline a piece I bought at Yandles Show. It sounds like I nicked someone else's wood but it is a disused railway walk and they cut overhanging and protruding wood out of the way and this is one of those bits. Its very rotten but enough to make 3 or 4 pens.

[QUOTE="paulm, post: 94546, member: 283"] A pair of elm pens. The Sedona is from a piece of elm burr I picked up whilst on a walk with the dog last year after it had been cut off and chucked into the side and the slimline a piece I bought at Yandles Show. It sounds like I nicked someone else's wood but it is a disused railway walk and they cut overhanging and protruding wood out of the way and this is one of those bits. Its very rotten but enough to make 3 or 4 pens. [/QUOTE]

Verification