• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

If the divers logo is paper, then try liberally applying/soaking it in PVA glue, rub it well in to ensure no streaks, then let it dry before casting.


This is a tip I've used when making resin paperweights.


Good luck,


Andy C


Top