New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

You can just change the nib, but it doesn't sound like it is that Eamonn may have nailed it with the feed being blocked, it could be plastic that hasn't been cleared or it could be dried ink, if you take it apart and give it a good clean then reassemble and try it. if that doesn't work you could always swap the feed from one you know that works. If you are worried about trying this send it to me and I will strip it and clean it it and check the feed. As Eamonn says they are very simple things.

Peter

[QUOTE="Buckeye, post: 108515, member: 294"] You can just change the nib, but it doesn't sound like it is that Eamonn may have nailed it with the feed being blocked, it could be plastic that hasn't been cleared or it could be dried ink, if you take it apart and give it a good clean then reassemble and try it. if that doesn't work you could always swap the feed from one you know that works. If you are worried about trying this send it to me and I will strip it and clean it it and check the feed. As Eamonn says they are very simple things. Peter [/QUOTE]

Verification