• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

You can use either thin ca or paste wax on your sandpaper & sand with the lathe running. This will make a slurry with the wood dust to fill the grain. Apply s/sealer after sanding.


Top