New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

I hammer a couple of nails into a piece of scrap wood and slip a cone bush onto each (you know the ones I mean, they come free with the mandrel and you never use them). The bushes stop the blanks from sticking to the wooden base. Then slip the blanks over the nails and spray away. Several thin coats from whatever distance is recommended on the spray can you are using.

[ATTACH]32256[/ATTACH]

[QUOTE="Walter, post: 277718, member: 95"] I hammer a couple of nails into a piece of scrap wood and slip a cone bush onto each (you know the ones I mean, they come free with the mandrel and you never use them). The bushes stop the blanks from sticking to the wooden base. Then slip the blanks over the nails and spray away. Several thin coats from whatever distance is recommended on the spray can you are using. [ATTACH]32256[/ATTACH] [/QUOTE]

Verification