• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Great first try Matt:thumbs:

Rough up the tube with coarse sand paper.

I use 5 minute epoxy. Glue gets in the tube mostly on the end

but I clean  most of it out before the glue hardens

and later on a heavy toothed round rasp pretty quickly.

Some guys plug up the ends and remove the plug material after.


Top