New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Very nice job Don. Can't see any bubbles on magnification. If you have bubbles in your mix try getting rid of them with vibration, maybe set your bandsaw away & stand your mixing pot on the saw table. The vibration may be enough to drive the bubbles out then pour slowly into your mould. Probably telling you what you already know but it may help someone.

[QUOTE="Bill Mooney, post: 117961, member: 603"] Very nice job Don. Can't see any bubbles on magnification. If you have bubbles in your mix try getting rid of them with vibration, maybe set your bandsaw away & stand your mixing pot on the saw table. The vibration may be enough to drive the bubbles out then pour slowly into your mould. Probably telling you what you already know but it may help someone. [/QUOTE]

Verification