New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Well I've moved slightly onwards in wood turning and decided to have a crack at a segmented vase...this is a picture of it this morning, the final glue up before it goes on the lathe, to be honest I'm having to change my underwear quite frequently every time I think about putting this on the lathe. I've put a Mortis on the base ready for it to go in the chuck, but have you got any advice or tips on turning this? I'm scared!!!

Sent from my iPhone using Tapatalk

[QUOTE="Midnight_Turner, post: 291042, member: 1431"] Well I've moved slightly onwards in wood turning and decided to have a crack at a segmented vase...this is a picture of it this morning, the final glue up before it goes on the lathe, to be honest I'm having to change my underwear quite frequently every time I think about putting this on the lathe. I've put a Mortis on the base ready for it to go in the chuck, but have you got any advice or tips on turning this? I'm scared!!! [IMG]https://uploads.tapatalk-cdn.com/20170505/1b8aa64327542a63fe50a3a61b42f38e.jpg[/IMG] Sent from my iPhone using Tapatalk [/QUOTE]

Verification