New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

If you haven't got a dead centre you can make one with a good bit of hard wood either with a Mt or just a round one to hold in your chuck also your revolving centre turn a bit of hard wood to fit over your old one and turn a point on that regarding your question you can use the bushes or just go direct into the tube

[QUOTE="Woody, post: 101007, member: 192"] If you haven't got a dead centre you can make one with a good bit of hard wood either with a Mt or just a round one to hold in your chuck also your revolving centre turn a bit of hard wood to fit over your old one and turn a point on that regarding your question you can use the bushes or just go direct into the tube [/QUOTE]

Verification