New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

This is so easy you can put veneer in the design
but i would say if you do glue the shim in one side at a time
as i have had 1 or 2 fail on double glue ups so glue one side and press using the dry side in the vice to compress the glued up portion when dry repeat then turn....or return to the bandsaw for ....a more interesting blank?:wink:

[QUOTE="turnaround360, post: 104469, member: 69"] This is so easy you can put veneer in the design but i would say if you do glue the shim in one side at a time as i have had 1 or 2 fail on double glue ups so glue one side and press using the dry side in the vice to compress the glued up portion when dry repeat then turn....or return to the bandsaw for ....a more interesting blank?:wink: [/QUOTE]

Verification