New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Phil,

The CA finish, I started getting the same as you 'ridgy', worked it out that I was to heavy handed with the CA.
I now use CA Ultra Thin and roughly 2 drops wiped per blank per coat. Use accelerator (Screwfix ) after every coat and it usually comes up pretty good.
I haven't yet tried BLO/CA yet. Anybody got any tips?

[QUOTE="rowdyyates115, post: 13085, member: 152"] Phil, The CA finish, I started getting the same as you 'ridgy', worked it out that I was to heavy handed with the CA. I now use CA Ultra Thin and roughly 2 drops wiped per blank per coat. Use accelerator (Screwfix ) after every coat and it usually comes up pretty good. :ciggrin: I haven't yet tried BLO/CA yet. Anybody got any tips? [/QUOTE]

Verification