New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Made a few blanks yesterday ready for my Roman Harvest kits from TB.Got all prepared to glue tubes in the house brass monkey weather in the workshop had 4 pens to do first 2 ok with the epoxy I have been using for most of my pens 3rd one stuck rushed out to garage squeesed it in in vice, my remaining blank and a half I thought I will use the medium CA I bought at Harrogate 1 to 3 mins set time seems to be setting much quicker had to rush out to workshop to vice again.End reult is I have 2 pen tops with the brass tube mabye about 1mm proud of blank will this be ok when sanded flushh with blank

[QUOTE="Themackay, post: 123166, member: 430"] Made a few blanks yesterday ready for my Roman Harvest kits from TB.Got all prepared to glue tubes in the house brass monkey weather in the workshop had 4 pens to do first 2 ok with the epoxy I have been using for most of my pens 3rd one stuck rushed out to garage squeesed it in in vice, my remaining blank and a half I thought I will use the medium CA I bought at Harrogate 1 to 3 mins set time seems to be setting much quicker had to rush out to workshop to vice again.End reult is I have 2 pen tops with the brass tube mabye about 1mm proud of blank will this be ok when sanded flushh with blank [/QUOTE]

Verification