New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

I use medium ca as well and the setting time depends not only on the temperature but the wood as well whereby some set as you're pushing it in and other take a while, I guess its to do with the porosity of the wood.

The choices you have with the tube sticking out are; turn the wood back off or mill off that 1mm. I would mill it off personally.

[QUOTE="paulm, post: 123170, member: 283"] I use medium ca as well and the setting time depends not only on the temperature but the wood as well whereby some set as you're pushing it in and other take a while, I guess its to do with the porosity of the wood. The choices you have with the tube sticking out are; turn the wood back off or mill off that 1mm. I would mill it off personally. [/QUOTE]

Verification