New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

I have never used epoxy. My attempts with using CA failed while turning. I switched to Gorilla glue years ago and have had 100% success. I drill and glue at the end of the day and the blanks are ready first thing in the morning.

I suspect a 1 mil difference will affect the nib protrusion length.

[QUOTE="Terry Q, post: 123218, member: 657"] I have never used epoxy. My attempts with using CA failed while turning. I switched to Gorilla glue years ago and have had 100% success. I drill and glue at the end of the day and the blanks are ready first thing in the morning. I suspect a 1 mil difference will affect the nib protrusion length. [/QUOTE]

Verification