• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

I seem to have solved the problem with the snakeskin.


I glued it to the tubes using pritt stick :thumbs: left it an hours to dry. I then coated the skins with modge podge again left for an hour to dry.


Mixed up a batch of resin and into the pot at 40psi. Result is perfectly clear resin and no discolouration of the skins. :thumbs:


Thanks to all for your input.


Top