Help Needed

[glenpen]

Has anyone turned the CEO pen kit I need help, it says the drill is a 0.368" drill but I cannot find one at that size.
Glen

 

[flexi]

Hi Glen, I use a vernier..... Size the tube and use what ever comes closest, I have both a metric and imperial set of drills.... I also ignore what the packets say as their normally wrong

 

[Phil Dart]

0.368 is the equivalent of US drill size Letter U. The metric conversion is 9.35mm but you can more than likely get away with 9.3mm. I'm pretty sure that 0.05mm isn't going to make that much difference.

 

[glenpen]

0.368 is the equivalent of US drill size Letter U. The metric conversion is 9.35mm but you can more than likely get away with 9.3mm. I'm pretty sure that 0.05mm isn't going to make that much difference.

Thanks Phil just checked on your site and you don't have them do you know if anyone sells them in the Uk

 

[pittswood]

Glen, check out this company. They sell 9.3mm drills.
HSS DRILL BIT 9.3 MM | Chronos Engineering Supplies
Kelvin

 

[21William]

There’s a letter U bit here for a couple of quid.

Letter Drill U | Chronos Engineering Supplies

 

[Neil]

Glen, any engineering supplies company local to you will supply drills in 0.1mm increments, Google engineering supplies and Southport and see what comes up.

 

[glenpen]

Thanks

Thanks for all the tips on getting my drill size . Now got one
Glen

 

[wm460]

Problem solved.