New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

If you are going to keep the bushes on,Mathis is the way. Use a sharp parting tool to create a sharp edge at the junction of the blank and th bush. Bushes should be viewed as consumables and replaced every few pens anyway, so don't whine about abrading the bushes out of size!

:nonono::nonono:

[QUOTE="Jimjam66, post: 116232, member: 58"] If you are going to keep the bushes on,Mathis is the way. Use a sharp parting tool to create a sharp edge at the junction of the blank and th bush. Bushes should be viewed as consumables and replaced every few pens anyway, so don't whine about abrading the bushes out of size! :nonono::nonono: [/QUOTE]

Verification