• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Help with colouring please

Graham_C

Fellow
Joined
Feb 1, 2017
Posts
1,153
Location
Tywyn
First Name
Graham
I have some really nice Olive blanks, and I would like to try colouring one or two.

They don't need stabilising, so what options do I have to get some nice solid colours in them?
 

Bill Mooney

Blind old git
Grand Master
Joined
Aug 16, 2014
Posts
11,096
Location
County Durham
First Name
Bill
Because it’s olive I would try a stain so the grain shines through. The grain is too nice to cover with paint
 

Graham_C

Fellow
Joined
Feb 1, 2017
Posts
1,153
Location
Tywyn
First Name
Graham
Because it’s olive I would try a stain so the grain shines through. The grain is too nice to cover with paint

Thanks Bill, that's exactly what I was going for - keeping the lovely figuring. I have some spirit stain, so will try that first :thumbs:
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Thanks Peter, which dyes did you use and how?

Mark coincidently I use the U Beaut selection Mark has shown in detail, follow the dotted line for use try to err on less rather than more. Some timbers I wait until using the dye last Olive is one such timber. I used to do a lot of judging in photography people using colour filters achieved unreal results.

Peter.
 

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,708
Location
Kent
First Name
Derek
get some artist oil paints in the colour you want then thin some cellulose sander sealer and put a very little of the oil paint into it when you have the blank to the size required give it a good coat of the mixture and when dry lightly sand it will soak into the softer areas and not the harder. Try this on a piece of scrape wood that is too small to be used and see what effect you get.
If I can find it will post a picture of a piece I experimented on tomorrow.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top