• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Thanks Ian

it was hollowed out with the crown revolution to 10mm and put aside to season, when re turned the finish wall thickness is approx 4mm. I used a round scraper tip to do the finishing cuts on the inside and then sanded the inside

hth

Andy


Top