New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Below is generally how I roll for wood pens.

1. Sand to 600 then burnish with shavings
2.. Sanding Sealer then cut back if necessary before applying a coat of friction polish.
3. Either CA or Melamine laquer 6 to 8 coats
4. Micro mesh to 12000
5. Crystalline wax top coat
6. Pray bushings have not welded themselves to the blank!

[QUOTE="Hallelujahal, post: 360363, member: 2526"] Below is generally how I roll for wood pens. 1. Sand to 600 then burnish with shavings 2.. Sanding Sealer then cut back if necessary before applying a coat of friction polish. 3. Either CA or Melamine laquer 6 to 8 coats 4. Micro mesh to 12000 5. Crystalline wax top coat 6. Pray bushings have not welded themselves to the blank!😆 [/QUOTE]

Verification