• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Pedant alert. :wink:


3/8" is actually 9.525mm so there is a chance that a 9.5mm drill might leave the hole a touch tight. Check that the tube slides in freely before you try to glue it especially if you are using CA. It is always better to use the exact size if you can.


Top