Stumbled on this web site whilst having a browse this morning. You may find it useful.
Vic
https://www.arizonasilhouette.com/library.php
Vichttps://www.arizonasilhouette.com/library.php
-
Thanks for visiting The Penturners Forum today.
There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.
To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.
Instruction Sheets for Pen Making
- Thread starter Vic Perrin
- Start date
- Joined
- Jan 31, 2013
- Posts
- 9,505
- First Name
- Terry
Interesting site Vic. Thanks for showing !!!
Gav
Registered
That's a great reference resource Vic, thank you for sharing! 
A great reference Vic but beware that different manufacturers sometimes have different sized tubes and you should ensure that the drills you need for the kit you're using are the right ones... for instance the Sedona's from TB have a different size to those from some other places.
Walter
Fellow
Here are some more links to instruction sheets:
Bear tooth woods (Berea Kits)
Links for CSUSA Apprentice and Artisan ranges of kits compiled By Wayne Racinowski from IAP website
Penn State Industries instructions library
Turner's Retreat
Timberbits
Bear tooth woods (Berea Kits)
Links for CSUSA Apprentice and Artisan ranges of kits compiled By Wayne Racinowski from IAP website
Penn State Industries instructions library
Turner's Retreat
Timberbits
chas_41_uk
Registered
I have started to measure the diameter and the length of the tubes before drilling, as I have had a few of kits from Axminster where one or the other of the tubes supplied in the kit is not the correct length :nonono: