ISO

[Les ELm]

Tube diameters and tube lengths for the Mistral pen kit.

Les

 

[Phil Dart]

upper, drill 15/32 - 45mm
lower, drill 25/64 - 65mm

 

[Les ELm]

Thanks Phil.
Would you have the tube OD and lengths for the following.
The tube lengths are not shown in their instruction sheets.
Alpha
Ares
Epsilon
Sigma
Zeta

Les

 

[Phil Dart]

They're not my kits Les. The Mistral is a Beaufort Ink kit (but I forgive you)

 

[Morse]

Hi Les.
The IAP have a library with a lot of info regarding pen barrels and lengths.
http://content.penturners.org/library/general_reference/psi_bush_tube.pdf
Just had a quick look as there is a lot of info.
Hope this helps.
I just logged onto my link. Part of the page was black ??
I went to PSI as the manufacture as the pens you mentioned I thought I'd seen there.
There's 10 pages just for PSI pens. I'm sure if you know the maker it would be there.
Loads of info in that library.
Dave

 

[clement]

Thanks Phil.
Would you have the tube OD and lengths for the following.
The tube lengths are not shown in their instruction sheets.
Alpha
Ares
Epsilon
Sigma
Zeta

Les

Ask Dan Smith at Taylor Mirfields Taylors Mirfield

 

[Les ELm]

Hi Les.
The IAP have a library with a lot of info regarding pen barrels and lengths.
http://content.penturners.org/library/general_reference/psi_bush_tube.pdf
Just had a quick look as there is a lot of info.
Hope this helps.
I just logged onto my link. Part of the page was black ??
I went to PSI as the manufacture as the pens you mentioned I thought I'd seen there.
There's 10 pages just for PSI pens. I'm sure if you know the maker it would be there.
Loads of info in that library.
Dave

Dave,

The IAP spread sheet is old and not up to date with any of the newer kits.
Does not have any of the off shore pen suppliers.

Les

 

[Les ELm]

Ask Dan Smith at Taylor Mirfields Taylors Mirfield

I sent an e-mail to Dan a few days ago with no response so far.

Les

 

[Les ELm]

Les