• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Italian Acrylic and Wood

ValleyBoy

Graduate Member
Joined
Jul 9, 2019
Posts
745
Location
Cardiff
First Name
Ash
I have really liked this colour blank from the moment I got it but couldn't work out what to do with it. So I finally decided to pair it with Thuya burl.

Nothing too complicated here. The section is a bit of work but I have shown that before I think. Also getting the logo coin to fit nice and snug is always a satisfying thing.

Anyway comments welcome.

Cheers
Ash

540B9213-23C8-459B-919F-8B4C90761F6D_1_201_a.jpg5A332772-89B4-43C3-9679-A9D5FED07463_1_201_a.jpg357FB00F-837B-4E0E-A48A-095A48DE7218_1_201_a.jpgF1F07B53-460C-46E2-9D9C-6964C3B59E7F_1_201_a.jpg
 

fortress

Registered
Joined
Apr 11, 2016
Posts
5,178
Location
Astley
First Name
John
That’s very nice indeed Ash, a wonderfully loud contrast, excellent work, well done. :thumbs::love_it::thumbs:
 

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,454
Location
Maidstone
First Name
mark
Lovely job their with a great pairing of wood and acrylic, I really love that green and have to agree it needed something with it.... Fortune favours the bold...... Well done :drool::drool:
 

Tiny James

Full Member
Joined
Oct 13, 2020
Posts
194
Location
Rugby
First Name
James
Ash as always stunning work.
Question
How do you get your threads so polished looking. do you polish before you start the threading routine?

james
 

ValleyBoy

Graduate Member
Joined
Jul 9, 2019
Posts
745
Location
Cardiff
First Name
Ash
Ash as always stunning work.
Question
How do you get your threads so polished looking. do you polish before you start the threading routine?

james

Thanks James

I don’t do any polishing of the threads at all, before or after.

It’s just a case of nailing the technique with the tap and die. It did take me a good amount of practice and tweaking of measurements. It can be frustrating. Trust me, a lot of plastic has hit the wall in my workshop...

I think it was Edison who said something about genius being 1% inspiration and 99% perspiration, and while I’m certainly no genius, that ratio is about right in my experience of pen making.

I read your previous post and you’re on the right track and I do the same as you in loosening the grub screw to tighten the die on the second pass each time. It gives the threads a bit more depth and makes them cleaner which helps prevent any stiffness. Also different materials will behave differently. So stick to one and practice then move to something else once you’re satisfied. The fewer changing parameters you have the easier you’ll sleep at night.

Cheers
Ash
 

Tiny James

Full Member
Joined
Oct 13, 2020
Posts
194
Location
Rugby
First Name
James
Thank you [MENTION=2096]ValleyBoy[/MENTION] for your reply. It's post replies like this that are gold dust to me full of great information.

I would love to spend a day sitting on your shoulder watch you thread a pen or two.

James
 

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,491
Location
Colebrooke, Devon
First Name
Phil
Great looking pen Ash, as always. If you still struggle for alternative colour pairings, try putting it with with Devon Cream. Full on 1950's retro.:drool:
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top