New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

This is a Junior Gent in a Mallee Burr, can't remember the colour, With celtic crosses on the barrel and cap, but I have decided it is too buusy with both of them so am turning another and will substitute a plain cap on one and a plain barrel on the other. I had a problem on the last cut of the cross on the barrel, the bandsaw blade snapped befor I could do the last cut and the new bandsaw blade wasn't the same kerf so I had to put in a piece of shim which you will see if you look close enough.

Peter

[QUOTE="Buckeye, post: 25075, member: 294"] This is a Junior Gent in a Mallee Burr, can't remember the colour, With celtic crosses on the barrel and cap, but I have decided it is too buusy with both of them so am turning another and will substitute a plain cap on one and a plain barrel on the other. I had a problem on the last cut of the cross on the barrel, the bandsaw blade snapped befor I could do the last cut and the new bandsaw blade wasn't the same kerf so I had to put in a piece of shim which you will see if you look close enough. Peter [/QUOTE]

Verification