New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Overfill with whatever, then take back to the original diameter, any further will elongate the lettering.
I would guess he has a 30W model, with a low PPI on the Raster setting, by the lines visible in the bottom of the engraving. Won't matter if you fill it with an opaque substance.

[QUOTE="Neil Lawton, post: 61732, member: 365"] Overfill with whatever, then take back to the original diameter, any further will elongate the lettering. I would guess he has a 30W model, with a low PPI on the Raster setting, by the lines visible in the bottom of the engraving. Won't matter if you fill it with an opaque substance. [/QUOTE]

Verification