• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Made a start on my haul of bits

D

DaddyG

Full Member
Joined
Dec 11, 2017
Posts
127
Location
Redcar
First Name
Graham
Well turned this today again not a fantastic blank but I turned it a lot faster than my previous ones.
Didn't crater as much but still sanded wet from 180 through the wet n dry grades and finished with micro mesh and buffed with blue towel.

IMG_20180310_202014114.jpg
 

Attachments

  • IMG_20180310_202033681.jpg
    IMG_20180310_202033681.jpg
    26.7 KB · Views: 60
Dalboy

Dalboy

Executive Member
Joined
Mar 20, 2014
Posts
7,708
Location
Kent
First Name
Derek
[MENTION=1779]DaddyG[/MENTION] when you take the photo try to stand back and then soom to the pen then the focus has a better chance of working. Unless you have macro then turn that on for close up work.

But from what I can see it does look good
 
D

DaddyG

Full Member
Joined
Dec 11, 2017
Posts
127
Location
Redcar
First Name
Graham
Fraid I'm just using my mobile, have now dug out my d5100 with 35mm 1.8 lens so should have pics that are loads better.
had to grab a few pics before we dropped them off for today!!!
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top