• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

managed to find some old blanks

M

Mez90b

Full Member
Joined
May 13, 2021
Posts
11
Location
Notts-UK
First Name
Mehul
i was doing a little tidy up and found a few blanks ive shared a couple of these but see what you think


Pen blanks.png
posted this photo in another thread recently. this is my colourful blanks. alimilite and grapevine.
wife has claimed the red, i;ll have the green.


woodblanks.png
found these last night while i was tidying up. 2x mahogany, 2x Oak, 2x Tulip


other stuff.png
not good enough for pen blanks (too thin - from a mix bag of end pieces and offcuts)
red will make it to some nice cufflinks
green/white might make a pen if i can work something out.
the rest of the offcuts - something will happen to them im sure. i originally bought the bag to see how well i get on with the material.


Lathe.png
This is the vintage Portass i mentioned on the "introduce yourself" thread. long way off from getting it going but slowly getting there.
my MT0 live centre arrived, and a 775 motor for something else also arrived so im going to try running it from the 775 to see if its powerful enough when i have the time. I still need to find a few things but im in no rush as i will have this working by the time i have the space to use it.
 
flexi

flexi

Executive Member
Joined
Sep 12, 2014
Posts
6,457
Location
Maidstone
First Name
mark
Looks like you will be busy.... I like the purple knobbly one! Sounds like you have some good plans already, good luck🤞🤞
 
M

Mez90b

Full Member
Joined
May 13, 2021
Posts
11
Location
Notts-UK
First Name
Mehul
flexi said:
Looks like you will be busy.... I like the purple knobbly one! Sounds like you have some good plans already, good luck🤞🤞
Click to expand...
the purple one is great, really annoyed that its too thin for a pen - but i do have a couple of ideas for it, probably a pendent or something similar.
 
M

Mez90b

Full Member
Joined
May 13, 2021
Posts
11
Location
Notts-UK
First Name
Mehul
flexi said:
12mm for a slimline?
Click to expand...
most of the offcuts are the trimming ends from the casts that the seller i bought them from does as they put them through the table saw to square everything off. there are a few that would fit a slimline pen kit but most wouldnt.

i'll have to measure them as some can be uneven but that's a good shout. i'll measure these all up so i have an idea.
 
Phil Dart

Phil Dart

Moderator
Executive Member
Joined
Nov 28, 2014
Posts
5,491
Location
Colebrooke, Devon
First Name
Phil
Those grapevine hybrids are going to look great when they're turned.

Looking forward to seeing how you tackle the wee lathe restoration too:thumbs:
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top