• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Mexican Rosewood

paulm

grave manibus faciendum
Registered
Joined
Oct 7, 2013
Posts
12,046
Location
Sandford
First Name
Paul
Mexican rosewood on an Exec (now a Churchill). Finished with 10 layers of ca and polished with Autoglym.
 

Attachments

  • mexican_rosewood_a.jpg
    mexican_rosewood_a.jpg
    62.2 KB · Views: 49
  • mexican_rosewood_B.jpg
    mexican_rosewood_B.jpg
    63.4 KB · Views: 49

paulm

grave manibus faciendum
Registered
Joined
Oct 7, 2013
Posts
12,046
Location
Sandford
First Name
Paul
like the wood and finish but the kit still dose nothing for me

I agree with you to some extent Alex. I would like the kit if the quality was there but its just not. I bought a herd of them a while ago but only 1/2 a dozen or so to go and I won't be buying any more... probably.
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Fine Pen Paul I particularly like the appearance open and ready to use that kit is pleasing undone unlike so many that are a lot of kit towards the nib IMHO.

Peter.:thumbs:
 

paulm

grave manibus faciendum
Registered
Joined
Oct 7, 2013
Posts
12,046
Location
Sandford
First Name
Paul
It looks like it Paul but there are quite a few RoseWoods that grow in Mexico Bocote normally has a spicy smell when you turn it

Oh, I couldn't say about that Woody I had my respirator on.
 

amazilia

Full Member
Joined
Jun 28, 2013
Posts
69
It looks classy to me, the nearest wood I have used like that is wenge. No criticism intended but from a photographic point of view if you stand the cap up you need more depth of field. When the pen and cap are flat and adjacent the depth to be in focus is say an inch, with the cap up then say 3 inches. So more problems getting everything in focus, plus a slower shutter speed with more risk of shake, making a rod for your own back !
Regards Terry
 

Neil

Fellow
Joined
May 21, 2013
Posts
3,137
Location
Hitchin, Hertfordshire
First Name
Neil
I think they're one and the same Woody aren't they? :thinks:

Here's the boring bit.

Bocote is the more correct name, but fundamentally they are the same wood. Bocote is of the Cordia spp, the exact name attributed to either eleganoides, gerascanthus or alliodora, there seems to e much debate. It is technically not a rosewood, being of the Cordia family, the same as Ziricote, and not the Dalbergia family which are the true rosewoods. Santo Rosewood is also one of the "fake" rosewoods. Regardless, its a nice wood!
 

paulm

grave manibus faciendum
Registered
Joined
Oct 7, 2013
Posts
12,046
Location
Sandford
First Name
Paul
Here's the boring bit.

Bocote is the more correct name, but fundamentally they are the same wood. Bocote is of the Cordia spp, the exact name attributed to either eleganoides, gerascanthus or alliodora, there seems to e much debate. It is technically not a rosewood, being of the Cordia family, the same as Ziricote, and not the Dalbergia family which are the true rosewoods. Santo Rosewood is also one of the "fake" rosewoods. Regardless, its a nice wood!

Thanks Neil, I can always rely on you to know... the Oracle of woods. :thumbs:
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top