• Thanks for visiting The Penturners Forum today.

    There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

    To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Mistral set in wenge

21William

Fellow
Joined
Jan 21, 2016
Posts
1,629
Location
Dorset
First Name
William
Very nice Walter. Did you need to do any grain filling before applying the Melamine Lacquer?
 

Penpal

Grand Master
Joined
May 26, 2013
Posts
25,342
Location
Canberra AUSTRALIA
First Name
Peter
Neat to have such a combination in Pencil and Ballpoint.

I have never used sanding sealer so extensively,could be an answer for me when using Wenge,for me a strange hard timber.

The softer finish is desirable,the design one of the best so far using this kit. Sorry for the repeat busted my right wrist yesterday and my computer had said no.


Peter.
 

Walter

Fellow
Joined
Apr 22, 2013
Posts
2,698
Location
Amble on the sunny Northumberland coast.
First Name
Walter
Neat to have such a combination in Pencil and Ballpoint.

I have never used sanding sealer so extensively,could be an answer for me when using Wenge,for me a strange hard timber.

The softer finish is desirable,the design one of the best so far using this kit. Sorry for the repeat busted my right wrist yesterday and my computer had said no.


Peter.

Thank you Peter. I find that sanding sealer between the grits makes for a more reliable finish with fewer coats of melamine required.

I have deleted the duplicate post for you.
 

silver

General dogsbody
Executive Member
Joined
Jun 29, 2013
Posts
6,304
Location
Somewhere in Staffordshire,
First Name
Eamonn.
They look well Walter..

Really nice shape and a superb finish.

That's how I see the mistrals should be done..

Never done any wenge for years.. :thinks:
 

Graham_C

Fellow
Joined
Feb 1, 2017
Posts
1,153
Location
Tywyn
First Name
Graham
Beautiful set Walter :drool:

Interesting that you sanding seal between grits, shall have to try that. Something new every day eh?

I quite like to see the gaps in Wenge - just my personal choice.
 

Walter

Fellow
Joined
Apr 22, 2013
Posts
2,698
Location
Amble on the sunny Northumberland coast.
First Name
Walter
After having some doubt cast in my mind by Brad (Bammer) as to whether this was in fact wenge I have re-examined my stock of blanks and done some research in various wood identification books.

I have concluded that the wood is not in fact wenge but ziricote. Just as much of a dusty pain to turn though.

Thanks for all the kind comments. Off back into the workshop now to prepare the blanks for a commissioned pencil in myrtle burr.
 
Warning! This thread has not had any replies for over a year. You are welcome to post a reply here, but it might be better to start a new thread (and maybe include a link to this one if you need to).
Top