New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Had to have a go and this is the result. A chrome Omega roller ball in Fruited Mallee burr. Don't know if anyone else has had a problem with the end finial bushing? The part you turn down to, mine is off centre so it doesn't run true on the mandrel and I've ended up with a slightly off centre end. I'll need to have a word with you dan. Hopefully mine is an odd one and the whole batch aren't affected.

In the photo you can see where the hole is off centre with the outside edge.

[QUOTE="rayf6604, post: 99684, member: 482"] Had to have a go and this is the result. A chrome Omega roller ball in Fruited Mallee burr. Don't know if anyone else has had a problem with the end finial bushing? The part you turn down to, mine is off centre so it doesn't run true on the mandrel and I've ended up with a slightly off centre end. I'll need to have a word with you dan. Hopefully mine is an odd one and the whole batch aren't affected. [IMG]http://tapatalk.imageshack.com/v2/14/10/05/49ee1d5399b1bc5ab09701acac3f67fe.jpg[/IMG] In the photo you can see where the hole is off centre with the outside edge. [IMG]http://tapatalk.imageshack.com/v2/14/10/05/35af3cb8aa888c51727aedcf7e2063a4.jpg[/IMG] [/QUOTE]

Verification