New posts

Thanks for visiting The Penturners Forum today.

There are many features and resources that currently you are unable to see or access, either because you're not yet registered, or if you're already registered, because you're not logged in.

To gain full access to the forum, please log in or register now. Registration is completely free, it only takes a few seconds, and you can join our well established community of like-minded pen makers.

Reply to thread

Message

Very nice job. I especially like the round one. I made mine from a set of inexpensive small pry bars. One of them I left the bend in the bar for hollowing. I included one of the little pry bars to show what I started with. Nice thing is they already have handles. I actually bought the screws from Easy Wood tools. They sell them in case you lose one. Their tools were just WAY too expensive, though.

[QUOTE="sbwertz, post: 32062, member: 172"] Very nice job. I especially like the round one. I made mine from a set of inexpensive small pry bars. One of them I left the bend in the bar for hollowing. I included one of the little pry bars to show what I started with. Nice thing is they already have handles. I actually bought the screws from Easy Wood tools. They sell them in case you lose one. Their tools were just WAY too expensive, though. [IMG]https://lh6.googleusercontent.com/-iguGKJEDr_g/Upp5YE_jqbI/AAAAAAAAEzw/bWagROz5egE/s512/carbide%2520tools.jpg?gl=US[/IMG] [IMG]https://lh4.googleusercontent.com/-Tjmfs247uLQ/Upp9p9LqY_I/AAAAAAAAE0E/Wxe46QEijuw/s512/closeup.jpg?gl=US[/IMG] [/QUOTE]

Verification